Quick answer
Repeal in law is the formal act of a competent law-making authority that ends the legal force of a statute, wholly or in part. It differs from amendment, which changes the wording and keeps the statute in force, and from suspension, which pauses operation without removing the statute. The three types are express repeal, stated in the repealing text; implied repeal, found where two provisions cannot be reconciled; and partial repeal, which removes only some provisions. Savings provisions and the jurisdiction's rules decide the effect on past conduct and pending matters, and the sections below cover each point.
What does repeal mean in law?
Repeal in law is the formal withdrawal of a statute's legal force by a competent law-making authority, wholly or in part. In everyday speech, "repeal" can mean any cancellation of a rule. In legal use it is narrower: the statute stops operating, and the repealing act decides whether that happens only for the future or also for the past.
An amendment changes the wording of a statute and keeps it in force. Suspension pauses a statute's operation without eliminating it. Repeal ends the statute itself, which is why the wording of the repealing act matters so much.
Repeal has three practical features:
- It is a formal act by an authority that has power to make the statute in the first place.
- Its effect on future operation starts when the repeal takes effect.
- Its effect on the past depends on the repealing wording and any savings provision. For example, section 16(1) of the UK Interpretation Act 1978 preserves the previous operation of the repealed enactment and accrued liabilities unless a contrary intention appears.
How does repeal differ from revocation, abolition and annulment?
Revocation is more often used for subordinate instruments such as regulations, repeal for statutes, and annulment declares a norm void from the start. The wording of the instrument governs, because usage varies by jurisdiction. Abolition usually refers to ending an institution or legal status.
What are express, implied and partial repeal?
Express, implied and partial repeal are three ways to describe a repeal: express repeal is stated in the text, implied repeal is found by a court, and partial repeal covers only part of an enactment. The drafting choice matters. An express repeal is easy to read because the text names what is removed. An implied repeal requires a court to decide that two provisions cannot stand together. Partial repeal describes the scope, and it can be either express or implied.
What is express repeal?
Express repeal is a repeal stated in the repealing text, which names the enactment or provision being removed. The UK Statute Law (Repeals) Act 2008 is an example of the drafting pattern: its section 1(1) states that "the enactments referred to in Schedule 1 are repealed to the extent specified in the second column of that Schedule" (Statute Law (Repeals) Act 2008).
What is implied repeal?
Implied repeal is a repeal that a court finds where two provisions cannot be reconciled, even though the later text does not say so. In U.S. federal cases, courts start from a presumption that both statutes can stand, as the next section explains. Under that approach, the intention to repeal must be clear and manifest.
What is partial repeal?
Partial repeal removes only some sections, subsections, words or schedule items of a statute, while the rest stays in force. It can be express, by naming the parts, or implied, where a later provision conflicts with only part of an earlier one. Drafters use partial repeal often in statute law revision, where a few words or one section is removed. The example later on this page shows the drafting.
How do courts apply the presumption against implied repeal?
In U.S. federal cases, courts first try to give effect to both statutes. In the U.S. federal case Morton v. Mancari, 417 U.S. 535 (1974), the Supreme Court quoted the rule from an earlier decision, United States v. Borden Co., that when two acts cover the same subject, courts give effect to both if possible. The Court also said the intention to repeal "must be clear and manifest."
In Mancari, a three-judge district court had held that a 1934 employment preference was impliedly repealed by a 1972 statute. The Supreme Court did not accept that result. It said that, in light of the factors indicating no repeal, it could not conclude that Congress consciously abandoned the policy.
That case concerns federal statutes. Whether another jurisdiction applies the same presumption, and how strongly, depends on that jurisdiction and its courts. Check the leading authority there before relying on it.
What happens to rights, liabilities and pending cases after repeal?
Under the federal rule in 1 U.S.C. § 109, a repeal does not by itself release a liability already incurred. The section says that "the repeal of any statute shall not have the effect to release or extinguish any penalty, forfeiture, or liability incurred under such statute, unless the repealing Act shall so expressly provide." The statute is then treated as still in force for enforcing that liability. The same section applies this rule to the expiration of a temporary statute.
The UK Interpretation Act 1978 gives a broader default. Under section 16(1), unless the contrary intention appears, a repeal does not revive anything not in force when it takes effect. It also does not affect the previous operation of the repealed enactment, or anything duly done under it. It does not affect rights, obligations or liabilities acquired under it, or penalties incurred for offences against it. Any investigation, legal proceeding or remedy relating to those matters may be instituted, continued or enforced "as if the repealing Act had not been passed."
A savings provision is a clause in a repealing act that preserves rights, liabilities or proceedings from the earlier law. Where a repealing act has one, its wording controls. Where it has none, the general savings rules of the jurisdiction apply, and those rules vary.
How a particular pending case is handled after a repeal is a question for the court, applying the repealing text and the savings rules that apply there. Contracts that refer to a repealed statute may also need review, because the contract's own terms matter alongside the repealing text.
How can you check whether a provision has been repealed?
Check the current official text of the statute first, then find the act that repealed it. Read the repealing text and any history notes together. The notes show that a repeal occurred, while the repealing wording shows what it covers. The UK legislation website notes that its revised legislation "may not be fully up to date" and that changes are recorded in separate lists, so check those lists as well.
For U.S. federal law, start with the official code and then trace the session law that made the change. Commercial research platforms can flag repealed status, but confirm the status against the official text before relying on it.
Where is repeal used in statute law revision?
Statute law revision acts can repeal named enactments or parts of them. The UK Statute Law (Repeals) Act 1989 and the Statute Law (Repeals) Act 2008 both repeal enactments named in a schedule, and each schedule states how far the repeal goes. The 1989 schedule lists whole Acts as well as single sections and words.
What does a partial repeal look like in a real statute?
Part I of Schedule 1 to the Statute Law (Repeals) Act 1989 repeals some enactments in full and others only in part. One entry reads: City of London Municipal Elections Act 1849, "In section 9, the words 'shall declare himself or shall be declared bankrupt or insolvent, or'." That entry removes only those words from section 9.
Other entries name particular sections. The entry for the Metropolitan Police Act 1839 lists "Sections 13 and 29," and does not list the Act's other sections. By contrast, the entry for the Bankruptcy Act 1883 reads "The whole Act," which is a full repeal. The schedule therefore mixes whole and partial repeals, and the reader has to check each entry's wording.
Frequently asked questions
What is the difference between repeal and amendment?
An amendment changes a statute's wording and keeps it in force, while a repeal ends the statute's legal force. Whether a change is an amendment or a repeal depends on the wording the legislature uses.
What is partial repeal?
Partial repeal removes some parts of a statute and leaves the rest in force. See the section above for the drafting pattern.
Does repealing a statute end liability for conduct before the repeal?
Not automatically. Under 1 U.S.C. § 109, a repeal does not extinguish a liability incurred under the statute unless the repealing Act expressly says so. The UK Interpretation Act 1978, section 16, has a similar default. Whether a particular liability survives in a given case depends on the repealing text and the jurisdiction.
What is implied repeal, and how do courts decide whether it applies?
Implied repeal is a repeal that no express words make, and that a court finds where two provisions cannot be reconciled. In U.S. federal cases, courts first try to give effect to both. In the federal case Morton v. Mancari, the Supreme Court said the intention to repeal must be clear and manifest.
Is repeal the same as expiration or a sunset clause?
Not quite. Repeal is an act that removes a statute, while a temporary statute expires under its own terms. For federal law, 1 U.S.C. § 109 treats the expiration of a temporary statute much like repeal for penalties and liabilities. Sunset clauses are written into the statute itself, so check its own terms for when it ends.
Does a repeal dispute ever need an expert witness?
Expert witnesses are sometimes needed when a repeal question depends on factual or technical evidence, while the meaning of a repealing statute is generally decided by the court. Legal Experts AI is a marketplace where attorneys and litigation teams find and retain expert witnesses. Users can get matched with an expert witness or browse expert witness profiles to find one for a specific matter.




